All interior skins are out!

We started this process of removing everything in the Airstream back in May.  As of Sat, Sept 7, we can officially say it is all removed.  Every item that was nailed down, riveted in, screwed in, glued in, and painted on is now gone.  Only working on Saturdays has been one of the reasons for taking so long, but then again, I'm pleased with what we've done and the time frame in which we accomplished it.  Could be worse, ya know?!  Now we begin the process of removing the floor and the belly pan.  We haven't exactly figured out which one we're going to tackle first....there are two schools of thought with this phase, and a lot of it will depend on how much my brother-in-law can assist us over the next few days.  We're going to be hitting some busy weekends over the next month, so there will be limited times of work days.  Either way, I hope to have the floor out and the frame painted before cold weather sets in.

Long ceiling panel making its way out the back window

Front end cap out--all interior skins removed!

It's like an oversized, upside down taco

Well, this past Saturday yielded only one thing.  The removal of the ceiling panel that runs almost the entire length of the Airstream.  We *finally* got that thing down.  It was nasty, it was not fun, but we got it done.  To get it out of the trailer, it needs to go out the back window.  While we did get the screen removed and the middle pieces of the frame down, we haven't quite tackled that job.  We decided to put it off until next weekend.  It was so hot & humid this past weekend that we couldn't handle it, and that big ol' upside down taco is gonna have to be rolled much tighter than what you see in the photos below:

Big progess made...

This weekend's work yielded quite a bit of progress.  Probably one of our most successful work days yet!  We got the outside antenna removed, the rear end cap out, tried out a stripper for the exterior gunk that was applied, and tried out the stripper on the interior paint.  The stripper used was aircraft stripper purchased at Auto Zone.  It had been recommended by one of my airstream restoration friends (thanks Lauren!)  It worked wonders on the exterior....not so much for the zolatone paint used on the interior panels.  Maybe it will just take a few more applications....we'll see.  Hopefully next weekend we'll have all the interior skins down.  All that's left is the ceiling and the front end cap.

Highly recommended for exterior stripping!

Watch those scrubbing bubbles work :)

Made a great deal of difference after just one application...

Read end cap removed!!  Woo hoo!

So proud of our efforts today :)

Now you see it, now you don't...

Behold! The frame!

Temperatures in the 70s in August.  In North Carolina? Unbelievable, but super nice not to sweat immediately upon entering the aluminum oven, aka, the Airstream.  We headed out to work on the trailer Friday afternoon since Mark was off work on Friday.  (Makes me a happy girl!)  We tried to address the door knob, only to discover that the plate we bought to cover the existing hole wasn't big enough to rivet onto the door.  (So, we gotta get a patch for that hole, just to cover that up with a pretty plate).  We removed more interior skins.  But the biggest news of the weekend was the picture I got from my brother-in-law Saturday afternoon......BEHOLD.  THE.  FRAME! 
When he texted me this picture....to say that I squealed like a little girl would be an understatement.  Such a blessing to have someone who was willing to help us with the floor, even though this isn't a project he necessarily wanted to undertake :)
Now time to order some POR-15, get to sanding, and start pricing marine grade plywood.  Oh, and we need some new steps too....

Thanks Derek!  We owe ya :)

Something was bound to get broke....

I'm honestly surprised it took us this long.  But we finally broke something.  My parents are kind enough to let us store the wig wam on their property, and when my Dad convinced twisted our arm enough to talk us into moving the Airstream into an open field (for lighting purposes!) we obliged.  Not happy about it, but oh well.  He's helping us remove the floor, and the barn had no electricity.  We were only lighting the area with work lights.  So, here we go, moving again.  Moving to a field that used to be the home of a greenhouse, so it *does* have running water and electricity nearby.  Sigh.  (Can you tell I'm not thrilled with this turn of events????)

Well, we move the Airstream and forgot to close on of the back windows.  It hit a low shelf in the barn and not only shattered but bent the frame.  *&^*%@!  I'm sure it's something that can be replaced, fixed, repaired, etc.  But, it didn't have to be this way.  On a different note....I found a handle for the lock!  Thanks to Vintage Campers, as they worked with me answering all my questions and nutty emails....helping me find the best possible fit for this poor door that only has a hole in it.  Fully operational with a steak knife and/or pocket knife!!!  Hopefully we'll get the handle installed this week.  Until then, check out our broke window!

Bent out of shape....

No glass, no class.

From one abandoned field to another...

Previous key hole....in the literal sense

Hitching a ride on a 'Stream full of dreams...

Axle has arrived!

Our axle was delivered last week.  And while I sit here at the beach, on vacation, I can't help but be a little sad that I'm so far away from the wig wam and that it's been two weeks since we worked on it.  But, next weekend we'll be back at it!  'Til then, here's some pictures of the newest acquisition:

Shiny & new!

The floor removal begins....

Disclaimer--I have *no clue* how long this process will take.  This may very well entitle the next six months of progress, who knows??  I didn't get a chance to update the blog last week, but we did make it over to the 'Stream and take a load of unusable items to the landfill.  Scraps of wood, insulation, old pipes, mattresses, cushions, etc.  It was something that desperately needed to be done, as our pile of removed items is creating a snake den in the barn.
This week brought an opportunity to finally get the shower pan removed, one of the upper storage cabinets down, and the biggest feat: beginning the floor removal.  We removed the screws from the C-channel in the front part of the trailer.  Our hope is to remove that section first, therefore keeping the shell stable.  We are not trying to do a shell-off restore, we'll see how far this goes.  My dad helped us out with sawing up the first portion of the floor.  We were able to lay eyes on a small portion of the frame, it doesn't look too shabby, but could use some TLC.  A pretty bad storm came up while we started, so we had to cut it short.  Will be on vacation for a week, so we'll be back in full gear in a couple of weekends.

Shower GONE!!!!  *finally*

Upper storage cabinets removed

Getting my dad involved in the mayhem

Fun & frivolity

The biggest news lately is that we received our title in the mail a couple of weeks ago.  So, it's o-fficial.  We are the owners as proclaimed by the fine state of North Carolina!

As promised, during the slow renovation times, I will be posting some items that I pick up here & there for the 'stream.  Recently, I purchased the sweetest little tea towel from Etsy (more specifically, follow the link here for the shop: lemonade makin' mama).  The teal mason jar is gonna look just fab in our little kitchen.

Also, I recently purchased the neatest app for Instagram (Rhonna Farrer designs) and was able to design this lovely little photo of the wig wam.  Check her out!!  Snug as a bug in a rug in the barn!

Looks like the next time we'll be working on the trailer will be July 20th.  We shall catch up soon!

If these walls could talk (or buzz)

This weekend's interesting find upon removing the remaining lower walls was a huuuuuuge wasp's nest.  Thankfully it had been vacated, but geez louise, that was a bit scary when the insulation was removed and you see THAT staring you in the face.

We were able to remove all the lowers skins except *one* little piece that was in the corner of the bathroom.  The shower base is still connected to the pipe under the trailer, and we don't have a pipe cutter, nor tin snips, nor a saws-all.  So, it remains.  As does that one piece of wall.  Needless to say, we were happy with our progress.  We won't be able to work on the 'stream for two weeks (bah!) but our next step will be removing the screws in the C-channel and removing the floor.  *fingers crossed*

wasps! well, they used to be there.

That *&^@# pesky shower floor.  And the one piece remains.

Rivet, rivet....

My new bestie

And so begins the process of removing the interior skins.  A bazillion rivets (probably not that much of an exaggeration) must be drilled and removed in some form or fashion.  Even when you drill through them, sometimes they still hang on and must be chiseled off.  All the while trying to save the skins for later use.  We broke a drill bit 15 minutes into it, but managed to not break another.  Somehow the window next to the door got cracked too.  Not sure if it cracked when I tried to open it to catch a breeze, or if by drilling one of the rivets the vibrations caused it.  I'm just not sure...but we'll need to replace it in the future.  We managed to work our way from the door all the way around to just over the wheel well, so pretty much half done.

First panel!  Here we go....

Busted....

A prototype!

Who woulda thunk that I would find such a cute little Airstream Overlander mini-me at World Market??  Well, that's just what I found last week.  I had seen some pictures of some goodies at World Market that must be geared toward vintage trailer enthusiasts.  When I laid eyes on this little baby, I just had to have it!  I love the red and white striped awning....this is exactly what I want for our Airstream when the time comes.
Even though I think World Market was intending for this to be a "food truck," it's now gracing my living room as a constant reminder of what lies on the horizon for us.

It's even got little propane tanks!!!

Slowly making progress

Well, we got the carpet up and most of the tile out this weekend.  Feels like we've been dead in the water for the last couple of weeks with only the exterior washing getting done.  We were also able to remove the interior wheel well covers.  We then spent the rest of the afternoon getting the barn cleaned out so that we can store the 'Stream there.  Thunderstorm season is upon us now, and getting it under cover is top priority.  Hopefully next weekend we can begin removing some of the floor.  We shall see!!!  Stay tuned....

Splish Splash, I was takin' a bath...

More washing this weekend.  Mark was working, so I asked Mom to help me do some more cleaning of the exterior.  Finally found the ladder and a little more hose!  We were able to clean up to the awning rail and the rear side.  I think one more trip to the farm, and she'll be completely washed.  I know I'm going about this a little bass-ackward, but Saturday was the first time I was able to lay eyes on the top.  Apparently the roof has been sealed with something that will need to be stripped eventually.  That is going to be QUITE an undertaking....one that we may enlist the help of the pros.  We'll see.  Including a photo of the lovely cicadas that have plagued us this summer.  At times, their song was deafening, almost maddening.  Thankfully they are dying off...but not without leaving behind some serious damage to my parent's blueberry bushes and some trees.

View of sealant vs non-sealed skin

Sealed roofline

Mom cleaning the window

Scrub a dub

A cling-on.  Ugly cicada on the ladder.